Surfapore W

The application surface should be dry and clean. Apply SurfaPore W by using a brush, a roller or spraying. No dilution is required. Dipping: Dip the wooden surface in SurfaPore W for 30 seconds. Remove any application excess. In any case (surface application or dipping) test results on a small area before full scale application. Maximum water repellence is achieved 24 hours after application. Recommended application temperature is above 5 degC. Consumption Rate: 6-8 square meters per litre of SurfaPore W. Packaging: PE Containers 1L, 4L, 30L, IBC 1000L